Polyene General Industries Private Limited

Our Vision

COMPANY VISION:
Polyene will lead in its expertise in innovation of Plastic applications using Extrusion Blow Molding for industries like Construction, Infrastructure, Water and Energy called POLYVATION which will lead to POLYVT25, that is, INR 20 Crore sales turnover by 31/03/2025.

Our Mission

COMPANY MISSION:
Short Term:
To achieve no 1 in South India market in Polychute System by 31/12/2024
Long Term:
To be among the top 3 suppliers of Polychute System in Asia by 31/03/2025

Our Milestones

Ever since the establishment of our organization, We have come a long way in terms of improvising our products and making new additions to our existing range. Our organization''s history and accomplishments can be summarized as follows:

1950’s: We were established in this year and specialized in manufacturing extrusion blown film of LDPE bags, liners for packing fertilizers, chemicals and tobacco.

1960’s: In this year, we moved our focus on setting up an extrusion plant for the manufacturing of LDPE/HDPE pipes in diameters of 12 mm to 75 mm. Also, we introduced the Blow Molded Plastic Pots to replace the heavier Metal Pots used for the transportation of water.

1970’s: With the advent of this year, we became a Private Limited Company and the products were marketed with the capacities ranging from 1 Litre to 20 Litres up to the capacity of 100 Litres. These products were used for the packaging of acids, corrosive chemicals, pharmaceuticals and food products like edible oils. The LDPE/HDPE of diameters 12 mm to 75 mm became the basis of the introduction of Low Cost Drip Irrigation systems in South India later in the year.

1980’s: We introduced large Blow Molded Containers (200-240 Litres) in the market. We also introduced Molded Food Grade HMHDPE Barrels (225/ 240 Litres) in Sri Lanka and became the first manufacturers of Food Grade Open Barrels from South India. Also our organization replaced the expensive and corrosion prone metal chutes in the Indian Railways with new designs of Blow Molded All Plastic HMHDPE Lavatory chutes. These are still used as the standard products in the Indian Railways.

1990’s: In this year, our organization introduced Floating Type Pumping Systems that were Solar Powered, under the World Bank Scheme. These pumps were installed on top of the specially designed HMHDPE Blow Molded Floats and over 20 such systems are still functional in the farmer’s wells in the southern states of Andhra Pradesh, Karnataka and Tamil Nadu. These products have maximized the water yield for every watt of consumed power. For this, our organization has received the Plasticon Award of the year 2005.

Our current projects include Floating Platform Arrangements to increase the energy efficiency of traditional surface mounted agricultural pump sets and solar installations with the help of Blow Molded Products. This was a runner up at the Development Marketplace of the World Bank Washington DC in 2006 and India Development Marketplace of the World Bank at New Delhi in 2007, A L-RAMP Award winner in 2007 and the Plasticon Award 2009 winner under the Innovation for Agriculture category and recently Plasticon Award 2012 winner for the Innovation and Infrastructure category for the design,development and manufacture of POLYCHUTE Debris Evacuation Systems for disposing high rise building debris in a eco-friendly,healthy and safe manner

Our projects are widely appreciated by agencies such as the World Bank and Winrock International. Construction giants like L&T Construction,Shapoorji Pallonji, Ahluwalia Constructions India Limited,Mani Group,Arabian Construction Company,Sobha Developers have welcomed and extensively used our POLYCHUTE system in all their high rise building projects be it, residential apartments,commercial buildings,malls, airports,hotels,IT Parks to name a few.

Our Founders

Late Mr M Parthasarathy (1924-2014)

UNIDO Assignments/Papers presented in International and National Forums
a. As an Expert in Water Management & Irrigation for the UNIDO, had been on short assignments in developing countries for varying periods nearly ten times and his work has benefitted countries like Egypt, Ethiopia, Zimbabwe, Nigeria , Rwanda, Mauritius, Mexico etc
b. As an Expert on Applications of Plastics for Agriculture, Was often called upon to present papers in India and abroad which includes
(i) Guadalajara in Mexico,
(ii) Deutsch KunstoffeInstitute in Darmstadt, West Germany,
(iii) International Plasticulture Congress at San Diego,U.S; Lisbon, Portugal, Alexandria, Egypt; Budapest, Hungary. Was invited by the FrenchMinistry of Industry to present a paper at the Europlastique Congress in Paris in 1985.
2B. Professional Experience:
a. Former Director joint founder/promoter: Yuken India Ltd: a joint venture with Japan to manufacture Oil Hydraulic Equipment in Bangalore in 1976
b. Former Director founder/promoter Wavin India Ltd: a joint venture with Holland for manufacture of PVC pipes & fittings in Chennai, Ghaziabad &Nagpur
c. Member, Indian National Committee for Plastics in Agriculture set up by the Govt. of India,Ministry of Petroleum & Energy under Shri GVK Rao
d. Chairman for two terms, Plastics & Linoleums Export Promotion Council, set up by the Ministry of Commerce, Govt. of India
e. Former President and Vice President of the Founding Board along with Shri J R Shah, IPI Indian Plastics Institute and first Chairman of IPI Chennai Chapter in 1980's
f. Past member of the Governing Council, Central Institute of Plastics Engineering & Tools(CIPET), Chennai, a joint project of Govt. of India & UNIDO, Vienna
g. Emeritus Chairman technical consultant to Polyene General Industries Pvt. Ltd., Chennai and a few other small Industries
h. Served as external examiner for M.Tech. in High Polymers, for the Indian Institute ofTechnology, Chennai.
i. Pioneered simple adapted versions of Drip Irrigation Systems and indigenious component requirement which has benefited India, Sri Lanka, Egypt, Pakistan etc.
2C. Education and Qualifications:
a. B.E. (Mech.) – 1949 – University College of Engineering, Bangalore
b. F.I.E. (Ind.) -- 1972 -- Fellow, Institution of Engineers (India)
c. F.I.M. (U.K.) – 1977 – Fellow, Institute of Materials, London
d. Sr. M.S.P.E. (U.S.) – 1970 -- Senior Member, Society of Plastic Engineers Inc.
Awards
a. Lifetime Acheivement Award for contribution to the Indian Plastics Industry in 2010
b. LRAMP award 2007 for innovation awarded jointly by the Lemelson Foundation (US) and Indian Institute of Technology Madras(IITM)

Our Team

Our organizational set up consists of a team of very diligent and assiduous professionals which helps us in achieving our business objectives. They work in a cohesive manner so as to carry out a project to its completion.

Our team comprises:

• Engineers

• Technicians

• Plastic experts

• Designers

• Quality analysts

• Project coordinators

Our professionals have years of expertise in their respective domains which helps us in finding appropriate solutions for our clients’ problems. They assist each other with their immense knowledge and thus, enable us to provide our clients best quality products. All their collaborative efforts have enabled our organization to reach the heights of success.

Clients / Customers

Our valued Clients as follows:
1. L&T Construction
2. TATA Projects
3. Shapoorji Pallonji
4. JMC Projects India Limited
5. Ahluwalia Contracts (India) Limited
6. ACC
7. URC
8. PS Group
9. MECPL
10. CICON

Product Portfolio

Our organization specializes in the manufacturing and exporting Extrusion Blow Moulded products. These are manufactured using virgin and food grade raw material.

Our range has gained much popularity due to the following features:

• Optimum performance
• Sturdy construction
• Dimensional accuracy
• Environment friendly
• Corrosion proof
• Leak proof
• Inert to chemicals
• Long service life

Apart from the above mentioned products, We also offer Plastic Lavatory Chutes, Overhead Roof Water Tanks for the Indian Railways, Floats for Renewable Energy Systems and Special Custom designed Products.

Our Excellence

Our Excellence in many more Projects:
1. WIPRO IT
2. Hiranandani Fortune City
3. Mantri Serenity
4. Prestige Jindal City
5. PBEL City
6. HIAL Expansion
7. Prestige Park Square
8. Prestige High Fields
9. Megasoft Salarpuria Satva
10. Aparna Amaravati One

Social Commitments

Polyene organise a annual seminar for the benefit of the Plastics Industry/Fraternity every year (started in 2015) in memory of our Founder late M Parthasarathy ( 1924-2014) . In line with his wishes that we give back to the Plastics Industry which has been a backbone of Polyene's standing in the industry

Our Ethics

With time, our organisation has become a trusted name in this industry . Some of our other factors that have contributed to the success of our organisation are as follows:

• Superior quality products

• Wide industry experience

• Customisation facility

• Timely delivery

• Latest manufacturing technology

• Safe packaging & transportation